In the publication 200, 400, 500 and 700 kg/hours, and also to 100 tons per day are a question of Miller series mills productivity 100. Possibilities of this equipment, a rule of care of it are described.
Often inhabitants of villages carry the grain on a grinding for many kilometers from the place of residence
Often inhabitants of villages carry the grain on a grinding for many kilometry from the place of residence. In such situation it is convenient and favorable to good owner to have the neyobolshy, simple and reliable mill „the Miller 100" or „the Miller 200". It gives the chance to grind not only the, but also grain of fellows villager. And it is already dopolniyotelny source of replenishment of own treasury.
Miller 100, Miller 200
All mills of the Miller series to 100 tons per day are created by productivity on the uniform platform equipped with modern system of sifting under vacuum which is protected the patenyoty. The system consists of the simple and nadezhyony cars sorting products razmola by means of centrifugal forces and vakuuma therefore they and are called scatterers pneumocentrifugal. They allow prakticheski to exclude completely vibration, to reduce extent of system pnevmotransporta and a consumption of air twice. Druyogimi words – to lower the energopotrebleyony.
Mills don’t demand frequent tekhnichesyoky service, are reliable in work, transport system, scatterers and valtsovy machines are stable in the most severe constraints of operation and on a proyotyazheniye of a progressive tense keep the set parameters.
The manufacturer of units offers melyyonitsa of two possible complete sets – the Standard and Luxury productivity of 100 and 200 kg of grain in hour. Distinction of these models is that on melniyoets the Standard it is possible to receive a flour pervogo or a second-rate quality, the komplektayotsiya mill Luxury is capable to develop not tolko the first, but at the same time both the second, and the highest flour grades.
Novelty of 2008 – „The Miller 100 Stanyodart" is serially equipped with a powerful zeryonoochistitelny drum from „the Miller 100 Luxury". New updatings allowed to reduce the price and to achieve record-breaking low electricity consumption – 5 kW/hours.
In the reception bunker of a mill the Miller 100 or the Miller 200 there is a large lovushechny sieve and a magnetic separator. A drum of a zernoochistka sostoit from three compartments: a small sieve, kukleotbornikai an ovsyugootbornik (selects larger, than zernoprimesi).
For areas, where grain too dry, to mills „the Miller 100" and „the Miller 200" predusmotrena delivery (at additional expense) opyotsiya – moistening and otvolazhivaniye systems. The system represents dvukhsekyotsionny capacity in total amount, rasschiyotanny on 2 tons of grain, and shneka intenyosivny moistening which allows douvlazhnyat grain to 6 % for one pass thanks to intensive hashing and uniform distribution of moisture.
"Miller" 400, 500, 700
Except mills of a small proizvoditelyyonost, units of various updatings by productivity 400, 500 and 700 kg of grain in hour are issued.
Two decades ago it was difficult to present that the mill can vydavat 60 % of a flour of the premium at its general exit to 80 %. After receipt of a flour-grinding oborudoyovaniye of the last generation from the eminent foreign companies there was a vozmozhyonost to overcome 50 %-ny a boundary on melyyonitsa productivity from 250 t of grain per day.
Buy mills "Miller" usually taken place and gramotyony millers who are a good judge in this case.
The unique shortcoming – sit pobolshe because wheat different goes and it is necessary to vary.
It is necessary to specify that taking into account wishes of users the new system of transportation of products of the grinding, allowing to direct it from any torn or razmolny proseivayoyushchy system to the necessary course – or in the flour premium, either in the first, or in the second is developed and introduced. Thus, depending on quality of grain it is possible to receive more than 65 % of a flour of the premium at its simultaneous exit to 80 %.
At such mobile technological scheme there is a possibility to develop muku practically any quality in a sootvetyostviye with inquiries of buyers. For example, it is possible to receive stably a flour of the povyshenyony whiteness considerably surpassing a whiteness torments of the premium. Or at a peyorerabotka of grain constantly changing on a kayochestvo to support the maximum exit of the premium.
And still an innovation – in vyboyny otdeleyoniya the Miller the Expert not two-three priyovychny branch pipes, and five. And it means that it is at the same time possible to receive to five grades of a flour in the assoryotiment necessary to the consumer. And if it isn’t required, then vyboyny branch pipes directly are under way blocked and transition even on a disposable grinding is carried out.
It is possible to tell that the model for non-standard service conditions where there is no good technologist is created and there are problems with quality of grain. Speaking in images, this mill – some kind of tractor (razumeetsya, high quality) in flour-grinding oblasti. The unit processes any raw materials, it is reliable in work and is easy-to-work.
"Miller" 1500-4000
The modular design and gorizontalyyony configuration as well as possible are suitable for formation of mills by a proizvodiyotelnost to 100 t per day. It can be placed in one or several rooms, on different floors as uniform system of pneumotransport Turboaer easily delivers mill grain from a warehouse, and a flour and bran – on a warehouse of finished product. For installation of such mill it is not necessary to build a special building. Appeal of a mill "Miller" productivity to 100 t is per day obvious on many factors at the same time.
First, initial cost of several moduyoly taking into account uniform system pnevmotransporta below, than cost of the mills consisting of one big module. And cost includes delivery and installation.
Secondly, engineering procedure predstavlyaet itself economic optimum reyozhy. In work it is possible to leave so much moyoduly, how many it is necessary for pererabotki grains at present. Service is carried out in turn, without stopping proyoizvodstvo as a whole.
It is easier to sell the equipment which has fulfilled the term in parts, ready blokami whereas big module, otsluzhivyoshy term, to sell almost neyovozmozhno.
Upon unit purchase the Miller 4000 Grandee is saved at least 75-80 % in relation to cost of the cheapest set of the mill designed by the block, not to mention that didn’t build a new building at all.
On newspaper materials To Fermerska hospodariate.